Advanced Search:

Contact us

联系我们

Telephone:(852) 2838 3620

Email:sales@silverwing.com.hk

Address: Unit 2, 4/F, Kwai Cheong Centre, 50 Kwai Cheong Road, Kwai Chung, New Territories, Hong Kong

Definition and basic functions of intelligent fresh air system

Source: Time:2020-05-21 00:18:37 views:

What kind of new system is an intelligent new system? Let us first look at the definition of intelligent air conditioning: the intelligent new system is a new machine with automatic adjustment function, which can be based on the pollutants in the external air (such as PM2.5, VOC), temperature, humidity, indoor The content of CO is analyzed and judged according to the pre-set indicators on the information transmitted by the sensor, and the functions of automatic opening / closing, opening and adjusting heating are timely and automatically turned on.

This mentions an east: sensor, or sensor. In the smart home system, it is an indispensable important factor. Some sensors are not necessarily smart homes, but without sensors, smart motion cannot be made. These sensors can be on the machine or an external detector that can be linked with the new machine, so that the indoor air quality can be detected more accurately.


fresh air system


Three basic functions that the new intelligent system should have:

1. CO
Why is CO, not other harmful body? Because carbon monoxide is the first element of indoor air pollution, because we do not know and pay attention to the damage caused by high carbon monoxide concentration every day. Therefore, the most important function of the new intelligent system is to monitor and analyze the concentration of carbon monoxide.
In the intelligent new system, as long as the user sets the desired concentration of carbon dioxide, the machine will judge the required communication mode and speed according to the data detected by the sensor. For example, if the CO concentration set by the user is 700PPM, the new machine can intelligently maintain the target concentration. If there is no home, the new machine will stop running; if someone enters the room, the sensor will sense the exhaled carbon monoxide within a minute or even a few seconds, so that the new system will start. Luck. If there is a customer in the home, the CO concentration rises and the new machine automatically adjusts the gear speed. The speeds required for power-on, power-off, and switching are completely independent of user involvement. The new system has become more energy-efficient and more user-friendly, and users have divided air quality.

2. PM2.5
For many families, the prevention and removal of haze may be the most important reason for installing a new system. Therefore, indoor PM2.5 concentration monitoring and analysis is also an important function. The user can preset an indicator by himself. When the indoor PM2.5 concentration reaches this value, a new machine is turned on; when the indoor air quality reaches the standard set by the user, the smart new system switches to a lower point The speed of the operation can be maintained in a healthy environment. Strictly speaking, it is not very scientific to control the new system based on the PM2.5 concentration, because the low PM2.5 concentration in the room does not mean that the room does not require communication. Therefore, the correct logic of the new system should be: when indoor PM2.5 is high, switch to
Indoor circulation mode to reduce indoor PM2.5; when the concentration of carbon monoxide is very high, first open a new mode and switch to another one. If the PM2.5 and CO2 concentrations are high, you can switch to the mixed mode, 50% of the air is introduced from outside, and 50% of the air is repeatedly filtered in the room. The operation logic of the perfect intelligent new system will consider each element and choose the most energy-efficient operation method to maintain a healthy environment.

3. Temperature
Since the new system feeds a large amount of external air, adjusting the new temperature is also an indispensable part of the intelligent new system. If the outside air is very cold, the new machine needs to automatically turn on the auxiliary heating function to heat the air into the comfortable temperature. The user only needs to set a desired outlet temperature, and the intelligent new system must ensure that the air blown out reaches the target temperature. The heating power is also automatically adjusted according to the outside temperature, the set output temperature and the machine's gear speed, so as to ensure that the new system uses the most power to maintain the warm and comfortable new temperature. Therefore, no matter how cold the outside is, the new machine will “blow the wall” without wasting electricity.

                                          Home |  About us |  Product  |  Solution Provider  |   News |  Contact us  粤ICP备17091917号-1

                              HK Address: Unit 2, 4/F, Kwai Cheong Centre, 50 Kwai Cheong Road, Kwai Chung, New Territories, Hong Kong


Top