ABCO can develop the best quality and high performance components based on customer needs and the environment.
1、The structure of ABCO wire wound SMD chip inductor
① WIND WIRE : WIRE FOR INDUCTANCE
② UV GLUE : MOLDING FOR PICKUP AS SMT
③ BODY : DIVIDE BETWEEN FERRITE AND CERAMIC BOBBIN
ACCORDING TO BUYER’S NEED
④ TERMINAL :Ag – Paste +Ni + Sn
2、The use of ABCO wire wound SMD chip inductors
1) FREQUENCY MATCHING
Strongly recommend high frequency ceramic chip wirewound inductors for high Q, J (± 5%) tolerances.
ABCO Parts Recommendation: ABCO NO. LMC1005, LMC1608, LMC2012
New version of the second half of 2015: ABCO NO. LMC0604, LMC0603
2) IMPROVEMENT OF TAG DISTANCE
Strongly recommend high inductance ferrite core wire wound inductors to achieve (± 5%) tolerances.
ABCO Parts Recommendation: LMF1005-N, LMF1608-N
Meets LMF1005-N and LMF0805 highly recommended harmonic distortion factors for low core losses, low RDC and excellent J (± 5%) tolerances.
ABCO Parts Recommendation: LMF1005-N, LMF0805
New version in the second half of 2015: ULTRA SMALL SIZE OF LMF0604, LMF0603 SERIES
ABCO 2015 NEW ITEM：
LMF0604：To achieve the world's first ultrasonic wirewound inductors and ultra-thin size.
|
ITEM |
Current LMF1005 |
New product LMF0604 |
Effect |
|
LENGTH |
1.02mm |
0.60mm |
53% DECREASING SIZE |
|
WIDTH |
0.56mm |
0.45mm |
|
|
SMT SIZE |
0.57m^2 |
0.27m^2 |
ABCO Evaluation Technique：
As ABCO developed to Ferrite Core. We can select core’s permeability according to customer’s needs and evaluate them under customer’s optimization.
