SANGSHIN Dust Sensor SDPN-05Y
Source：本站Time：2018/10/29 15:51:46
SANGSHIN Dust Sensor SDPN-05Y Features:
1、Ensure quality uniformity
2、according to the quality error of the customer standard, can be adjusted
3、Ensure product traceability
SANGSHIN Dust Sensor SDPN-05Y Technical Specifications:
1、Action power supply: DC 5V ± 5% (Ripple: 30mV이하)
2、Current consumption: below 100mA
3、operating temperature and humidity: - 10 ~ 45 ° C, 95% RH or less
4、size: W 59 X H45 X D20 (mm)
5、detected particle size: about 1μm or more
6、the output method
①Negative Logic Pulse output,
②Low Pulse ratio (Hi: 4.5V or more, Lo: 0.7V or less)
| Item | Description |
| Supply Voltage | DC 5V ± 5% (CN1:Pin1=GND, Pin3=+5V), Ripple:less30mV |
| Current consumption | Less than 100mA |
| Operating temp/humid. | - 10 ~ 45℃, less95%RH (no dew drops) |
| Storage temperature | - 30 ~ 60℃ |
| Size | W 59 X H45 X D20 (mm) |
| Weight | approximately 30g |
| Detectable particle size | Approximately 1㎛ |
| Detectable density range |
Approximately up to 1.5pc of cigarette(THIS)/10m3 in clean air (up to 2.0mg/m3 in the range of Particle Counter-1㎛ or higher) |
| Output method |
1.Negative Logic Pulse output, ① Lo time ratio % (recommended measurement time : 30sec.) ② Hi：approximately 4.5V or higher, Lo : approximately 0.7V or lower 2.TR output: Pull-Up resistance 10㏀ |
| Measurement implementation |
Approximately 1 minute after power supply (time to stable the temperature of resistor) |