/men/news_view.aspx?id=1574&gp=195
iA iVAC Module
Source：本站Time：2018/9/30 14:10:21
1、iVAC is designed for main controller of vehicle HVAC systems (HVAC: Heating, Ventilation, and Air Conditioning).
2、iVAC is an one-chip solution for control various HVAC systems.- Discrete devices on HVAC system is integrated for reduce system cost and PCB configuration complexity.
- A variety of HVAC systems can be configured by an one-chip (e.g. FATC / DATC / MTC).
3、iVAC is an optimized product for automotive HVAC systems.
- Cortex-M3 with peripherals and 10 channel motor drivers (Automotive grade).
- Integrated LIN / CAN communication controller and transceiver.
- External trigger interrupt and additional LDO outputs.
*Note
1. MTC (Manual Temperature Control)
2. FATC (Full Automatic Temperature Control)
3. DATC (Dual Automatic Temperature Control)iA iVAC Module Application Examples:
|
Switch Interface |
▶LIN 2.1 Controller & Transceiver ▶CAN 2.0AB Controller & Transceiver ▶SPI, UART, I2C |
|
Motor Driver |
▶10 Channel half bridge |
|
MCU Features |
▶CortexTM-M3 (up to 50MHz) ▶18KB SRAM ▶288KB Embedded Flash ▶On-Chip OSC with PLL ▶Sleep / Deep-sleep mode ▶PWM, Timer, Watchdog Timer ▶GPIO with External Interrupt |
|
ADC Interface |
▶22 channel, 10 bit Resolution |
|
Analog Features |
▶Over temperature protection ▶Under / over voltage lockout ▶5 Channel LDO |
|
Operating Temperature |
▶-40℃ ~ 105℃ |
|
Operating Supply Voltage |
▶6V ~ 18V |
|
Package type |
▶144 pin LQFP (20mm x 20mm) |
|
Certificate |
▶AEC-Q100 ▶MSL 3 Level ▶PB-Free / RoHS |